Light angle excitation by LASER beam is possible to sample.Optical access or light emission detection are possible.Sample specimen can be heat up to 400 deg.
USM-1200 series makes it possible to observe the sample surface in UHV at ultra-low temperature by STM and/or AFM.
It can observe the sample surface
at low temperature in UHV by STM
or AFM and analyze surface
electronic properties using various methods.
System of USM-1400 series
is adopted newly designed
cryostat of which liquid helium reservoir is built under the SPM stage.
This system was developed for the electrical and physical research on nano structure at low temperature. It can be applied to various kinds of STM, AFM and multi-probing measurements.
Advanced Unisoku SPM technology completed a new series of the
Ultra Low Temperature SPM. Compact design achieved easy operation and reasonable cost.
Precise measurement sequence by full digital control.Enhancement of maintenance and support system by modular architecture. Uperior "High-Stability" and "Low-Noise" electronics.
A gold (Au) deposition film on a mica substrate is the optimum substrate for scanning probe microscopy of monomolecular films. Please contact us!
UNISOKU has successfully developed nickel and platiniridium STM probes using an electropolishing method.Enables reliable STM measurement without requiring troublesome probe treatment
This has allowed us to maintain conductivity and reduce the separation at the CNT-probe interface.
SPM Sample Image Data of UHV STM System USM-1100, UHV Ultra LT STM System USM-1200, UHV Ultra LT and High Magnetic Field STM System USM-1300, UHV Ultra Low Temperature SPM System USM-1400
It is installed in SEM stage enable to measure 4 point local electric
conduction in submicron area.
Each probe position can be
controlled in 3 dimensional
directions in nanometer
resolution.
This system enables various kinds of "micron-order" to "nano-order" surface electricity measurements and manipulation in the atmosphere.We manufacture high-vacuum systems
UP-100U is a manipulator that can travel in the X, Y, and Z axes at the nanometer level. In combination with SEM/FIB/optical microscopes, can be used in a variety of ways such as manipulating/ probing on a micrometer/ nanometer scale.
UP-200R Series are small rotation stages developed for applications that require microscopic rotation and position detection in atmospheric and high-vacuum conditions. Rotation Stage UP-200R/UP-200RE, Rotor UP-200UR, XYZ Three-axis + Rotation Four-axis Stage UP-200URE
Probe tips are shaped with a small tip angle so that probes can be placed close together at acute angles without touching one another.
Capable of soft contact with samples.
Platiniridium Probes (Mechanical Grind), Platiniridium Probes (Electro-polishing) P-100PtIr(P), Platiniridium Probes (Electro-polishing) P-100PtIr(S), Tungsten Probes P-100WP, Tungsten Probes P-100WS, Ni Probes P-100Ni, PtIr coating tungsten probe P-100W/PtIr
Settable temperature range is from -80 deg C to +100 deg C. Light weight and compact footprint. Vacuum pumps are not required.
RSP-1000 is possible to measure up to 512 absorption spectra under the reaction at the shortest of 1 millisecond intervals.
TSP-1000 is a laser flash photolysis system for use in the measurement of transient absorbance.